Embedded 4/8/16-CH Instrukcja Użytkownika Pobierz pdf (Strona 29)

4/8/16-channel H.264 DVR User Manual

3.7.6 PTZ

Enter the “PTZ” screen from “Main Menu” →“Advanced”, as shown below:

Channel: selecting the channel to which the dome camera is connected (to select any

of the latter 4 channels, click “Next Page”)

Protocol: selecting the dome protocol of the corresponding brand and model, with two

options, Pelco-D by default

Baud rate: selecting the baud rate used by the dome, with the 4 options of 1200, 2400,

4800 and 9600

Data bit: with the options of 5, 6, 7 and 8, 8 by default

Stop bit: with the options of 1 and 2, 1 by default

VERIFY: with the 5 options of None/Odd/Even/Mark/Space, None by default

Address : Complete the PTZ code of the corresponding channel.

Just set “protocol”, “baud rate” and “address code” in order to set the PTZ.

See “Shortcut Menu” →“PTZ Control” for PTZ control.

3.7.7 Network setup

Enter the “Network” screen from “Main Menu” →“Advanced”, as shown below:

TYPE: with 4 options: STATIC, DHCP, PPPOE and 3G.

STATIC : allocating an IP address manually.

DHCP: acquiring an IP address automatically.

After selecting the DHCP mode, restart the system after confirmation. After starting, the

system will establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated an IP address, which will be displayed on the

screen.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 52 53

Brak uwag

Embedded 4/8/16-CH Instrukcja Użytkownika Strona 29